The optimal wheel restraint
solution to secure loading areas

Powerchock System 3

The Powerchock™ System 3 provides high performance and outstanding value. This model combines unsurpassed level of safety and an effective communication system with alarm.

The Powerchock™ System 3 communication package offers:

– Non-contact wheel sensor to ensure proper chock position.

– Interior and exterior LED lights.

– Alarm, manually armed by dock worker.

System Components

The Power Chock™ System 3 is composed of a large steel chock mounted on an articulated counterbalanced arm. The chock is placed in front of the vehicle’s rear wheel and locks onto a ground plate.

The communication system consists of a single wheel sensor linked to interior and exterior red and green signal lights.

Product Highlights

  • Unsurpassed Restraint – Simple physics: truck’s weight pushes chock teeth into robust ground plate grid.
  • Sensor Detects Proper chock Position– Physically-protected non-contact wheel sensor ensures proper chock position.
  • Visual And audible Communication System – Control panel includes interior Red/Green lights connected to exterior Red/Green signal lights and alarm.
  • Easy to Set – Chock handle is ergonomically positioned on spring counterbalanced arm and chock can be set as far as 14 feet from the loading dock.
  • Solid Components – Chock is made of high-tensile steel, over 4 times stronger than conventional steel. Ground plate comprised of series of robust grids to clamp chock.
  • Superior Steel Protection – Ground plate and arm are hot-dipped galvanized at over 800 degrees Fahrenheit. Chock has double protection: Electroplated and powder coated.
  • Designed for Winter – Chock is designed to break through ice and snow using the weight of the truck. Snow removal is easy with optional All-Direction Ground Plate, equipped with angled steel ramps on all sides. Steel deflector tabs extend below ground level to deflect edges of plows over steel ramps. Close to twenty years of operation in winter climate.
  • Virtually eliminates field errors – All units are pre-assembled, pre-wired and tested at the factory for quality control and minimum installation time. High quality anchors, fasteners and brackets supplied for standard installation.
  • Quality Engineering Reduces Total Cost of Ownership.
  • Simple, reliable system made with high quality components makes for a wise long-term investment.


The Power Chock™ vehicle restraint is guaranteed to be exempt from defects in fabrication and components if used properly and as intended, for a period of one (1) year following delivery date, and includes a three (3) year limited warranty on the Power Chock™ chock and ground plate.

Key advantages

Highest level of safety Simple, reliable operations.
Universal compatibility Fits 100% of vehicles. Not dependant on RIG bar.
Excellent value Offers industry’s lowest Total Cost of Ownership.
Greater restraining force Restrains the wheel instead of the RIG bar.
User friendly Quickly and easily set by driver in less than 30 seconds.
Not affected by extreme weather conditions Conceived to endure extreme winter conditions.
Maximizes productivity Ingeniously designed to minimize maintenance costs and downtime.
Environmentally friendly Does not use toxic fluids; consumes minimal energy.
Low Maintenance Virtually maintenance free: no moving with chock griping on grid plate, no lubrication. Limited to visual inspection 2 minutes per system. Average expense with replacement parts: Year 1: $0 Projection over 5 years : $140.00
POWERCHOCK - Easy to set - Wheel restraint system
POWERCHOCK - Designed for winter - Wheel restraint
POWERCHOCK- Removing chock - Wheel restraint system
POWERCHOCK - Installing chock - Wheel restraint system
POWERCHOCK - Greater restraining force - Wheel restraint system
POWERCHOCK - Snow Removal - Wheel restraint system

Reduce Repair Cost

Since we installed loading dock door barriers, our dock doors have not been struck. As a result our maintenance and repair budget has been significantly reduced.

Denis Vallée, Director of Maintenance
Olymel L.P

Universal compatibility

I wanted a restraint that didn’t depend on RIG bars,which are sometimes rusted out or torn off. The PowerChockTM System goes along with what drivers have been taught to do, which is to set a chock when they back intothe dock. This system gives us peace of mind.

Matthew Bourlakas, COO
Second Harvest Food Bank

Choose Safety. Choose GMR Safety

We purchased the PowerChockTM System for the safety level it provided. We have installed this equipment in various facilities over the last 12 years. In our opinion, it is the best system on the market.

Serge Guy, Director

Total Cost Ownership

We wanted a system that would work with all types of vehicles. We tested many types of restraints; the simplicity of the Power ChockTM System and its total cost of ownership was what sold it for me.

Martin St-Pierre, Vice-President Logistic
Lumen Sonepar


With the Power Chock System, we purchased value. From a maintenance stand point, there is virtually nothing that can go wrong with these units and they provide the safety we were looking for. The average cost per unit has been less than $50 a year. We have been very pleased with the great support  of the GMR team.

Mike Lecroy, Maintenance Manager

Easy to use

For our shunt drivers, it takes less than 30 seconds to set or remove the PowerChock. There has been no financial impact or extra cost with the use of the PowerChock systems.

Mr. Alex Tarini, Director of Distribution
Metro Grocers

Simplicity of design

The Power ChockTM System has proved to be indispensable in our working environment. Our drivers love it because it’s so easy to use. It provides the level of security that we needed at Molson and we are extremely satisfied after having tried several different technologies.

Alex Zarate, Packaging Manager
Molson Canada
GMR Safety is a world leader in the design and manufacture of wheel restrain systems. Our commitment: contribute to our customer's and partner's success by providing innovative, durable solutions to secure loading areas.

North America

2430 Boul. des entreprises
Terrebonne, Quebec
J6X 4J8, Canada

Phone: 450 968-0299
Toll Free: 1-888-629-4494
Fax: 450 968-0269



Phone: +33 7 83 62 69 01